Gem Remotes - Products

		products \| order transmitters \| part numbers \| boatlift dealer links
		wiring diagrams \| support \| warranty \| contact us

GEM REMOTES PRODUCTS - COMPLETE SYSTEMS

Part No. GR1

One Motor Control Systems

Features:

On/Off Security Switch
Manual Up/Down Switch or One-touch automatic Up/Down Switch (Auto-Stop)
Three Button Hand Held Radio Transmitter (remote control)
Unit can be wired at 110 or 220V AC
Special Order: 220 Only
Special Order: 50 Amps
Special Order: Auxiliary Circuit ($30)

Two Motor Control Systems

Features:

On/Off Security Switch (shown)
Manual Up/Down Switch or One-touch automatic Up/Down Switch (Auto-Stop)
Leveling Switch for Two Motor Systems
Three Button Hand Held Radio Transmitter (remote control)
Unit can be wired at 110 or 220V AC
Special Order: 220 Only
Special Order: 50 Amps
Special Order: Auxiliary Circuit ($30)

Part No. GR2

Auto-Stop Systems: Auto-stop systems allow you to raise or lower your lift to a specific position at the touch of a button. Without the auto-stop functionality installed, buttons on the transmitters will have to be held down until the lift is as high or as low as you need. Auto-stop systems require the installation of one of four "limit switches". The limit switch you need, depends on the type of motor/s that you are using. Refer to the pictures below to determine which type of limit switch you will need, and indicate this at the time of order.
E-Drive Limit Switch Part No: KELS	Sea Drive Limit Switch Part No: KCLS (Limit Switch not shown)	Flat Plate Limit Switch Part No: KFLS	Rotary Limit Switch Part No: KRLS
• Auto-Stop Features. Auto-stop systems are shipped with the following features: manual up/down switch, auto-stop on/off switch, and leveling switch. Also included is our three-button remote control transmitter, part #7240, a floating remote that controls the stop. For more info on the remote, see our transmitters page). • Upgrading to Auto-Stop. GEM Remotes representatives continue to receive calls from customers wanting to upgrade from a regular remote system to a Auto-stop system. Upgrades are available now for customers that desire the Auto-stop feature. Click here to see the upgrade kits that we offer. • Choosing a Limit Switch. If you are still not sure which limit switch is right for you, you may wish to see more pictures. Click here to see more.

Part No. GR2F1

2-for-1 Control Systems

Features:

Run Two Single Motor Lifts With One Controller
Run Two Single Point Davits Individually or Together
(2) Independent Motor Leveling Switches
Three Button Hand Held Radio transmitter

Options Available On All Radio Remote Control

Auto-Stop

1-Motor Personal Water Craft Control System With WATER RESISTANT Transmitter: This unit was just redesigned to run up to one 1 Hp Motor @ 120VAC. • The dimensions of the remote are only 2.8 x 1.8 inches!! •The range of the remote control for this system is 300 feet!	Part No. GRP1 • size of box is 8x6 inches • auto-stop is not available on PWC units

Part No. GR4	Four Motor Control Systems Features: On/Off Security Switch 230V only Manual Up/Down Switch or One-touch Automatic Up/Down Switch (Auto-Stop) Independent Motor Leveling Switch (1) Three Button Hand Held Radio Transmitter Special Order: Auxiliary Circuit ($30)
Lift Disconnect Option New product! This is a switch that can be used to quickly turn off the power to your lift. By installing this 4 Pole 40 Amp disconnect switch, your lift can be isolated and controlled from a single location. It can also be used on elevators to isolate a lift from the main power feed. This will help with the corrosion to the lift that can occur when power is left on continuously. Part Number: 4POLEDISCONNECT 7" x 4.9" x 5.5" UL Listed

GEM REMOTES
4651 Mercantile Avenue
Naples, Florida 34104
Tel: 239.642.0873
Fax: 239.642.8391
contact page
email us

return to homepage

Call the professionals with a proven track record of troubleshooting all your dock and lift needs:
GEM REMOTES!
(We have been in business since 1985!)